Universal plow light with low and high beam, turn signal, white parking light and auto warming lens. Especially suitable for heavy vehicles such as tractors, loaders and plows. Measured light output of high beam 2508 lm, range 271 m @ 1 lux, low beam 963 lm, range 170 m @ 1 lux.
The Purelux Blizzard is a versatile plow light approved for road use, featuring separate high and low beam, turn signal, parking light function and heated lens. Another unique feature is that the turn signal and parking light module can be mounted on the right or left side of the light, or alternatively on top of the light. So there is no need to buy a separate version of the Blizzard for the left and right sides; the same light can be used on both sides of the vehicle. The wide beam pattern provides broad and even illumination of the vehicle’s immediate surroundings, making it easier, for example, to see road edges and ditches, even in difficult conditions. The measured light output for the short lights is 963 lumens and a range of 170 meters at 1 lux, while the measured light output for the long lights is 2508 lumens and a range of 271 meters at 1 lux.
The Blizzard is an excellent choice for heavier vehicles such as tractors and loaders, but is especially useful on snow removal equipment, where the plow often obscures the vehicle lights behind it. The lamp’s 4-millimeter tempered glass lens is an effective conductor of heat, and an automatically heated lens ensures that the lens remains permanently fused, even in icy snow or snow with rain. The heating is always on when the light is on and has its own power cord to connect the heater behind a separate switch. The heater can also be turned on at any time, such as when the vehicle is running.
A robust aluminum body, stainless steel mounting base and the highest possible degree of waterproofing (IP69K) ensure that the luminaire will not succumb under heavy use, without being subjected to shocks and impacts or extreme conditions that put its durability to the test. The mounting base supplied with the luminaire can be attached to the base or to the back of the luminaire, depending on the mounting position, making the luminaire adaptable to any vehicle. The DT-6 connector is integrated into the back of the body, and the connector’s connecting part is supplied with the lamp for easy connection. Two-year (24 months) warranty!