A very versatile RGB backlit switch panel for controlling 4 different devices from the same location. Perfect, for example, for controlling the lights of a work machine, truck or SUV.
Purelux Multi-Switch Dashboard Controller is a very versatile and convenient switch panel for controlling four different electrical devices (lights, warning lights, engine fan and even seat heater). With the switch panel, you can, for example, control the front, rear and side work lights on your work machine, as well as the warning light separately, and the switches for all the lights are conveniently located in the same place. The lights can be turned on and off individually, and with the switch in the center, all the devices installed behind the panel can be turned off at the same time. All lights connected to the switch panel (as well as other devices) can be turned on permanently (i.e., turning the button on and off with another click), momentarily (the light turns on when the button is pressed) or flashing.
The switch panel has RGB backlighting that automatically adjusts to the ambient brightness, which can also be turned off by pressing the “Mode” switch once. A total of 45 different picture stickers and five black self-adhesive stickers for marking switches are included. This way you can mark the switch intended for any other device or light to avoid confusion. Thanks to the illumination, the symbol on the switch shines clearly even in the dark.
From the switch panel, all lights connected behind it can be lit either permanently, momentarily (by pressing the button at the bottom) or flashing. You can change the function by quickly pressing the Mode button in the center of the panel twice, after which the LED indicators above the switch will start flashing. Then press the switch whose function you want to change. This way, for example, you don’t need a separate flashing relay to make the lights flash! In addition, the panel is equipped with a convenient memory function, that is, it turns on the lights in the same mode that was used before the power was turned off.
NOTE! The rated current of the switch panel is 480 W at 12 V and 960 W at 24 V. The power of electrical devices switched on at the same time can therefore total 480 W (or 960 W). Circuit 1 can withstand a maximum current of 30 A, circuit 2 a maximum current of 20 A, circuit 3 a maximum current of 10 A, and circuit 4 a maximum current of 5 A. Each circuit has its own fuse in the control box.